How To Tell If Refrigerator Compressor Relay Is Bad. Remove the panel to gain access to the compressor. Locate the starter relay and unplug it from the compressor.
You can usually hear the. Locate the starter relay and unplug it from the compressor. Shake it out and hear the noise.
Ok, Guys, Let’s Know Step By Step How You Will Check It.
The lcd should display “0.000” for s good relay. With the relay in the vertical position, coil of the relay upwards, check if there is continuity between terminals 1 and 3 of the relay. If it rattles, the relay is bad and can be replaced by going to an appliance store and getting a.
So, If You Notice Such Repeat Starts And Stops Of The Compressor, That’s A Surefire Sign.
Locate the starter relay and unplug it from the compressor. You can also tell whether the refrigerator compressor is faulty by taking a look at the compressor fan. Best full size refrigerator under $250.
Detach The Relay From The Compressor And Shake It.
You can usually hear the. Shake the relay in your hand and listen for a rattle. To access the compressor and condenser fan, pull the refrigerator away from the wall, disconnect it, and remove the small panel on the rear at the.
Shake It Near Your Ear Once More To Listen For A Rattling Noise, So You Can Confirm That It’s Faulty.
Shake the relay in your hand and listen for a rattle. You should be familiar with the normal hum of the compressor, the. Use a flathead screwdriver to remove the one or two screws that are holding the panel on.
Unplug Your Refrigerator Power Line From The Wall Plug Or.
Unplug this from the compressor. Pull the wire retainer that holds the relay to the compressor off. Run a continuity test on the relay between its terminals using a multimeter to.